Design and construct a remote-controlled robot capable of fighting a tournament against another robot in one vs one match format.....
A . Match Structure
•2 technical timeouts are allowed of 2 minutes each.
B . Specifications
1 . Team Specification :
•Any team can participate in Robowars, KIITFEST. A team may consist of a maximum of 4 participants. These participants can be from same institute.
•College ID Card is mandatory for all the registered members of the team.
•Team Name: Every team must have a name which must be unique. KIITFEST reserves the right to reject entries from any Team whose name it deems inappropriate, offensive or conflicting. Organizers must be notified during if a Teams name has been changed.
•Team Representative: Each team must specify their Team Representative (Leader) at the time of registration. All-important communications between KIIT FEST team members and the registered teams will be done through their Team Representative. The Team representatives must submit valid contact details (phone no., email ID etc.) at the time of registration.
*NOTE : All teams must report one day prior to the actual date of the tournament.
2 . Bot Specifications :
•The machine should fit in a box of dimension 500mm x 500mm x 500 mm (l x w x h) at any given point during the match. The external device used to control the machine or any external tank is not included in the size constraint.
•The weight of the machine should not exceed 30KGs. All batteries should be on board for wireless bots. The weight of the remote controller will not be counted.
•Robots operating on pneumatic or hydraulic mechanisms are not allowed.
•Active weapon bots are allowed.
A . Mobility
All robots must have easily visible and controlled mobility in order to compete. Methods of mobility include:
•Rolling (wheels, tracks or the whole robot).
•Non-wheeled: non-wheeled robots have no rolling elements in contact with the floor and no continuous rolling or cam operated motion in contact with the floor, either directly or via a linkage, but are not true walkers as defined below. Motion is "continuous" if continuous operation of the drive motor(s) produces continuous motion of the robot. Linear-actuated legs and novel non-wheeled drive systems are also allowed under this category.
Mobility methods that are NOT allowed:
•Flying (using airfoil, helium balloons, ornithopters, etc.) is not allowed.
•The robots should not secure itself on the ring surface by using suction cups, diaphragms, sticky treads, glue or other such devices.
3. Manually operated jumping and hopping are not allowed.
B . Robot Control Requirements:
•Both wired and wireless control are allowed. For wireless control, the power supply must be on board.
•Control must be exhibited over all of its functions and positions.
•The teams using wireless control must have an at least four-channel wireless remote-control circuit or two dual control circuits which may be interchanged before the start of the match to avoid frequency interference with other teams. Cases of any interference in the wireless systems will not be considered for rematch or results.
•Remote control systems from toys may be used. Remote control systems available in the market may also be used, while nonstandard or self-made remote-control systems can be used only after approval from the organizers.
•The team should pair up the wireless remote with the machine before putting it into the arena. No extra time will be provided for this once the machines are put inside the arena, and not connecting the remote with the machine prior to that may attract a penalty on the team.
C . Battery and Power:
•The machine must be powered electrically. Use of an IC engine in any form is not allowed. Onboard batteries must be sealed, immobilized-electrolyte types (such as gel cells, lithium, NiCad, NiMH, or dry cells).
•The electric voltage between any 2 points on the machine should not exceed 24V DC at any point in time. Participants will have to bring their own converters for standard power supply according to Indian standards.
•Participants must protect the battery terminals from a direct short and causing a battery fire, failure to do so will cause direct disqualification.
•Use of damaged, non-leak proof batteries may lead to disqualification.
•Special care should be taken to protect the onboard batteries. If the judges find that the battery is insufficiently protected, the team will be disqualified immediately.
•Change of battery is permissible of same voltage and same ampere during match
•Only bots with onboard batteries will be allowed.
D . Weapon Systems:
•Robots can have any kind of magnetic weapons, cutters, flippers, saws, lifting devices, spinning hammers etc. (if they qualify the criteria mentioned below) as weapons.
•Following weapons cannot be used:
•Liquid projectiles (Foam, liquefied gases)
•Any kinds of inflammable liquids
•Weapons causing invisible damage (Electrical weapons, RF jamming weapons and others).
•Only active weapon bots are allowed (sumo bots are not allowed).........
Ayush Tandon- 7436873410